◆Rolling Conditions：
Material: stainless steel
Feedstock thickness:1.0mm Feedstock width：400mm
Finished product thickness：0.2mm Finished product width：400mm
Rolling speed：V≤100m/min
Rolling pressure：180T
◆Device Configuration：
Main engine：Ф110/Ф360×500 4-Roller Cold Rolling Mill
(1)Screw down gear：
1、Electric press motor YZ 5.5KW×2 sets：
2、Can be pressed at the same time, lifted, or lifted separately, pressed down；
3、The worm gear is pressed into a secondary enveloping toroidal worm gear with a center distance of 240mm and a module of 12mm.
4、Depression screw is B120×6, material is 40Cr;
5、Worm gear box material is ZG270-500。
(2)Rack Mounting：
1、Two plates of close housing post(sectional dimension of the vertical shaft 200×260mm)
2、With imported pressure plate
3、With roller device；
4、The upper roll is spring balanced
(3)Roller Device：
1、Working roll diameter × roll surface width Ф110×500mm Material：9Cr2Mo Antifriction bearings are adopted
2、Supporting roll diameter × roll surface width Ф360×500mm Material：9Cr2Mo FC4058192 is adopted as the bearing
3、Lubricating system：Dry oil lubrication
4、Roll changing mode：Manual roll change(matched with roll changing track) | 
